Recent › Forums › BARKER CABINETS › Filler piece question

Viewing 1 reply thread
  • Author
    Posts
    • March 20, 2025 at 8:45 am #2370 Reply
      Mike Huhn

        I see the fillers can be ordered in small incremental widths starting at 2 inches.
        If i need a 1 to 1.5 inch filler, can I assume the plywood based/laminated 2 inch filler can be scribed to fit the space?

        Thanks.

      • March 20, 2025 at 3:37 pm #2371 Reply
        ChadBarker
        Keymaster

          Yes, you can cut them down to under 2” if needed. 2” width is our minimum as anything smaller would be too narrow to run through our edge banding equipment (smaller than 2” width would not touch the rollers and possibly jam).

      • Author
        Posts
      Viewing 1 reply thread
      Reply To: Filler piece question
      Your information:




      Scroll to Top