2-Door 90 degree wall cabinet W90

This topic has 6 replies, 1 voice, and was last updated 2 months, 2 weeks ago by ChadBarker.

Viewing 6 reply threads

Author

Posts
- March 17, 2026 at 11:09 am #4280
  DJ
  Hello. For a 2-Door 90 degree wall cabinet (W90) Left hinge side, with depth 24” and width 25”, how wide will each of the doors be?
  Thanks!
- March 17, 2026 at 2:10 pm #4283
  ChadBarker
  Keymaster
  Sure, see here for a top view of that cabinet:
  Attachments:
- March 17, 2026 at 6:11 pm #4285
  DJ
  Thank you. I am struggling to have an upper corner and have the nearby wall cabinets look close to symmetrical.
  
  So for a left hinged 90 degree upper, can the depth be less than 20”, specifically 17.25”? That door will be pretty narrow – I was thinking it could be a slab and look like a filler, while the wider door can be shaker inset.
- March 18, 2026 at 11:12 am #4286
  ChadBarker
  Keymaster
  20″ for the cabinet DEPTH, is fine. The door would be about 7″ wide on the left side. This would work well as a shaker door; I don’t think a slab would be needed, as it would draw attention to the single, narrow door.
  Attachments:
- March 19, 2026 at 7:49 am #4290
  DJ
  Can I reduce the cabinet depth to 17.25”? I think the left door side would then be 4.25”…
- March 19, 2026 at 1:46 pm #4292
  ChadBarker
  Keymaster
  Sure, you can make the depth anything you want. If your exact size isn’t listed, you can order the closest option and then request a depth modification in the order notes at checkout. We’ll make the change prior to production.
- March 19, 2026 at 1:51 pm #4293
  ChadBarker
  Keymaster
  Actually, now that I’m looking at this, the door is too small to properly support hinges and be built with a panel. Using a slab door is an option, but it likely won’t look right, in my opinion. You would be much better off switching to a blind corner cabinet in this case.
  Attachments:
Author

Posts